head wr_laser_cal wpwrcal Thermal Specifies the calibration factor used to convert the number read from the laser power sensor into Watts. For a constant light output from the write laser diode, increasing wpwrcal decreases the value of laser power reported by the head via the laser command. There should be no need to adjust this parameter during normal operation of the head. real

0.000

0.000 to 500.000

cal

../commands/laser.xmlCommand: laser

..\..\ShowAllErrors.htmFirmware 0 Error Index

..\..\ShowAllCommands.htmFirmware 0 Command Index

..\..\ShowAllNVS.htmFirmware 0 NVS Index

Updated: Wed Jul 16 19:37:03 2008 PST